ZenPacks : Juniper Netscreen Performance : Comments

RE: Juniper Netscreen Performance

community@zenoss.org — Tue, 04 Jan 2011 19:01:46 GMT

Unable to install on ver 3.0.3 with these error message :-

message : 'NoneType' object has no attribute 'clone'

Error installing ZenPack /tmp/ZenPacks.community.JuniperPerformance-1.0-py2.4.egg

RE: Juniper Netscreen Performance

community@zenoss.org — Thu, 06 Jan 2011 15:29:17 GMT

I used the recompiled version of this ZenPack for py2.6 in Zenoss 3.0.3 w/o issue. Grab them here:

http://dev.zenoss.org/zenpacks/

Note, those ZenPacks aren't all tested. Some of them worked w/o issue for me and others completely failed to install. Use at your own risk.

RE: Juniper Netscreen Performance

community@zenoss.org — Mon, 19 Sep 2011 18:52:30 GMT

Added the renamed 3.x compatible version to the above attachments, for easy access. Again, as dshankar said, this is not tested, and we only renamed the filename. Let us know anymore results.

RE: Juniper Netscreen Performance

community@zenoss.org — Wed, 19 Oct 2011 04:47:44 GMT

I'm using this zenpack in 3.1.0 and it works perfectly.

I have also created a modeller that will set Netscreen device serial numbers. Would be happy to provide it to add to this pack one of you maintainers is interested?

RE: Juniper Netscreen Performance

community@zenoss.org — Tue, 11 Sep 2012 14:41:10 GMT

Zenpack works perfectly in Zenoss 4.2 if you remove "-py2.6" from Filename.

Only drawback is that Polcy Based Netscreen VPN Routes are not recognized as Network Routes in Zenoss. Until Zenoss gets some better Layer 3 network discovery mechanisms it would be nice if this Juniper/Netscreen zenpack would mimic these VPN routes as static routes to Zenoss.