Submitted by: Benny Chitambira
Description:
The Zenpack provides temperature, climate and cluster chiller measurements from Swiftbases Climate devices.
It monitors and provides graphs for:
- Temperature
- Humidity
- AirFlow
More information on these devices can be found on:
http://www.theclimate.co.uk/
http://www.swiftbase.com/support.php
Screenshots:
Components:
Also provides:
- Swiftbase Mibs
- SNMP traps, events mappings and transformations in /Events/Environ
This Zenpack works with SwiftCM2 device by default, but can be easily extended/modified to work for SwiftCM1 and SwiftCM3163 or any other SwiftCM type device.
Apply template to appropriate devices after installation.
Installation:
Assure that an device class named "Environment" exists at Devices before installing this ZenPack. So: /Devices/Environment
Different datapoints may be available for your device depending on the sensors that are attached.
It is advisable to check oids for your specific sensors and then add them (and hence add corresponding graphs) to the template.
The zenpack is extensible and one can incoporate other snmp datasources or modify the graphs that can be generated from them. Upgrades may follow depending on features that are required.
Requirements:
- Zenoss Versions Supported: 3.0
- External Dependencies:
- ZenPack Dependencies:
- Installation Notes:
- Configuration:
History:
Change History:
- 1.0 initial release
Tested:
Source: https://github.com/zenoss/Community-Zenpacks/tree/master/ZenPacks.community.SwiftCM2
Known issues: