Submitted by:

chewblocka (Matthew Block)

This is a template for additional data collection on PowerEdge 2950 servers. It would also probably prove useful on other Dell devices that use OpenManage, but may need a little tweaking (as far as number of processors, etc). It currently does the following:

Collect data points for

• Temperature Probe Reading (1/10 Degree Celcius)
• Fan RPM (4 fans)
• Processor Status (2 CPUs)
• Memory Device Status (8 Memory slots)
• Power Supply Status (2 PSUs)
• Array Disk State (6 disks)

Thresholds are setup for

• Critical event for Disk Array status other than 3 (ok)
• Warning event for Fan RPM < 3450
• Critical event for Memory Status other than 3 (ok)
• Critical event for Power Supply Status other than 3 (ok)
• Critical event for Processor Status other than 3 (ok)
• Warning event for Temperature > 42 or < 8 degrees c

Graphs for

• Temperature reading
• Fan RPM

Screenshots:

REQUIREMENTS:

     Zenoss Version: 2.2

     ZenPack Dependencies:

     External Dependencies:

     Installation:

Source: http://zenpacks.zenoss.org/trac-zenpacks/browser/zenpacks/

Tagged Releases:

     http://zenpacks.zenoss.org/trac-zenpacks/browser/tags/

Change History:

Trac tickets: http://zenpacks.zenoss.org/trac-zenpacks/report/1

Known issues: