Zenossian Kells Kearney has upgraded the graphical MIB Browser ZenPack
to properly uninstall and "spoonfeed zenmib when directories are
found". This handy ZenPack provides a graphical MIB browser and adds
the ability to install MIBs via http. Since this ZenPack fixes a
broken uninstaller, you need to uninstall it to upgrade it.

To uninstall the MIB Browser 1.04 ZenPack:
Install the new 1.05 version, this will throw an error and appear to
fail and still report as version 1.04
Run the command "zenpack --remove=ZenPack.community.mib_utils"

Then install the ZenPacks.community.mib_utils-1.05-py2.4.egg normally.

MIB Browser: http://www.zenoss.com/community/projects/zenpacks/mib-browser

Community ZenPack Repository page: trac-zenpacks/wiki/ZenPackscommunitymibutils

Thanks Kells!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Community member Mike 'malbon' Albon has updated the HPUX ZenPack to
version 2.1.1 to address an issue found in this zenoss-users thread:
http://forums.zenoss.com/viewtopic.php?p=31432

HPUX ZenPack for filesystems and performance monitoring: http://www.zenoss.com/community/projects/zenpacks/hpux

Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityHPUXMonitor

Thanks Mike!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Big thanks to Zenoss Community member Bob Killick for providing the
new DragonWave AirPair ZenPack. This ZenPack provides basic
monitoring of DragonWave AirPair series radios, under /Devices/Network/
Wireless/AirPair. It was tested with the AirPair 100. Elements
configured for monitoring are as follow:
* Receive Signal Level - as measured in dbm
* Radio Transmit Power - as measured in dbm
* Modem Throughput - as measured in Mb/s

The ZenPack also includes the required AirPair series MIBs.

DragonWave AirPair: http://www.zenoss.com/community/projects/zenpacks/dragonwave/
Community ZenPack Repository: trac-zenpacks/wiki/ZenPacksSLSMCDragonWave

Thanks Bob!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com


_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Many thanks to Zenoss Community member Ian 'Klinstifen' Smith for
contributing his new Site Window Portlet ZenPack. This ZenPack
creates a new dashboard portlet that can point to any webpage. Instead
of entering a "Location" you type in a URL and then the site is loaded
through the iframe. Possible uses include the URL of a network
weathermap, a ticketing system or anything else with a URL.

Site Window Portlet: http://www.zenoss.com/community/projects/zenpacks/sitewindow

Thanks Ian!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

I've taken the patch from http://forums.zenoss.com/viewtopic.php?p=26096#26096
to add some support for PostgreSQL 8.2.x. Thanks to 'sportnix' for
testing it a bit, it probably still needs some more debugging to get
more of value for PostgreSQL 8.2.x users.

PosgreSQL ZenPack: http://www.zenoss.com/community/projects/zenpacks/postgresql
Community ZenPack Repository: trac-zenpacks/wiki/ZenPacksLearningObjectsPostgresqlMonitor

Thanks to user 'dsudell' for the patch!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com



On Aug 26, 2008, at 4:53 PM, mray wrote:

 

 

I'm starting a new top-level post for when new Community ZenPacks
become available. As they come in, I'll continue posting them in
the zenoss-zenpacks forum for individual discussion and post them
here for simply announcing them. As always, Community ZenPacks are
available here:
http://www.zenoss.com/community/projects/zenpacks

Enjoy!
Matt Ray
Zenoss Community Manager







_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Zenoss Community member Blake Drager has updated his recent Bridgewave
ZenPack to include the device class /Devices/Radio, removing an
installation requirement.

Bridgewave Point-To-Point Radios: http://www.zenoss.com/community/projects/zenpacks/bridgewave/
Community ZenPack Repository: trac-zenpacks/wiki/ZenPacksBlakeDragerBridgewave

Thanks Blake!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com
_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Zenoss Community member Tijmen van den Brink (aka 'gentux31') has
generously provided his new Juniper IVE ZenPack. This ZenPack
monitors Juniper Instant Virtual Extranet (IVE) SSL VPN.

Juniper IVE: http://www.zenoss.com/community/projects/zenpacks/juniper-ive
Community ZenPack Repository: trac-zenpacks/wiki/ZenPacksTijmenvandenBrinkJuniperIVE

Thanks Tijmen!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com




_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Community member Eric Feldman has generously provided the new NetWare
6.5 ZenPack. This ZenPack provides OS and Filesystem modeling and
performance monitoring. It Provides:
* A new device class = /Devices/Server/NetWare
* Filesystem modeling collector plugin and a Filesystem template
for performance monitoring, including display and calculation of
purgeable disk space on NetWare volumes (done using SNMP and a shell
script routine on the Zenoss server to calculate usedBlocks). The
_ADMIN volume is dropped since it’s not a “real” volume.
* OS Modeling (memory and swap size) collector plugins
* OS and memory performance monitoring via a Device template
o Processor utilization
o Load averages (1 min/5 min/15 min)
o Connections and peak use
o Packet Receive Buffers (Current and Max)
o Directory Cache Buffers (Current and Max)
o Service Processess (Current and Max)
o Read/Write and disk I/O activity
o Logical and Physical Memory breakdown (based on Remote
Manager reports)
* Thresholds/alerts for:
o Abends
o Page Faulted Memory Spaces
o Directory Services open/closed
o Time synchronizaton status
* IP Service monitor for NCP (port 524)
* zLink to standard Novell Remote Manager port (8008) on the
Status tab
* All current Novell MIB files added to Zenoss for trap handling
* Software inventory info for SP5 and SP7 added to Novell vendor
listing

NetWare 6.5: http://www.zenoss.com/community/projects/zenpacks/netware
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityNetWare

Thanks Eric!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com




_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users