New ZenPacks in the Community - Open Source Network Monitoring and Systems Management

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

45. Mar 11, 2009 4:29 PM (in response to Matt Ray)

New ZenPacks in the Community

Thanks to Zenoss Community member Tijmen van den Brink (aka
'gentux31') for providing his new Riverbed ZenPack. This ZenPack
monitors Riverbed's Steelhead WAN acceleration appliances. It grabs
basic information from the Steelhead.

Riverbed: http://www.zenoss.com/community/projects/zenpacks/riverbed
Community ZenPack Repository: trac-zenpacks/wiki/ZenPacksTijmenvandenBrinkRiverbed

Thanks Tijmen!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

g3vt

104 posts since
Nov 26, 2007

Currently Being Moderated

46. Mar 16, 2009 8:19 PM (in response to Matt Ray)

New ZenPacks in the Community

A very quick note about this check; the Barracuda template defaulted
to a 5s cycle interval which we missed until we started noticing the
checks timing out. You might want to check that interval if you're
using this pack out there.

-trey

On Sun, Feb 15, 2009 at 8:51 PM, Matt Ray <mray@zenoss.com> wrote:

Zenoss Community member Paul Winkeler has generously donated his new
Barracuda Spam Appliance ZenPack. The template contains performance
graphs for the inbound queue and the number of:
* allowed
* tagged
* quarantined
* virus
* bad recipient
* spam
messages received by the Barracuda. The ZenPack takes a novel
approach for a datasource, using a Perl script to call wget and screen-
scrape the web page with statistics on performance. Check it out if
you're developing something similar, source is on the Community
ZenPack Repository.

Barracuda Spam Appliance: http://www.zenoss.com/community/projects/zenpacks/barracuda

Community ZenPack Repository: trac-zenpacks/wiki/ZenPacksPBnJSolutionsBarracudaWatcher

Thanks Paul!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

47. Mar 25, 2009 5:40 PM (in response to g3vt)

New ZenPacks in the Community

The Barracuda Spam Appliance ZenPack has be updated to make the
ZenPack location installation independent by referencing ZENHOME
instead of hard-coding /usr/local/zenoss. Thanks to Ken Granger for
being the guinea pig in figuring this out.

Barracuda Spam Appliance: http://www.zenoss.com/community/projects/zenpacks/barracuda

Community ZenPack Repository: trac-zenpacks/wiki/ZenPacksPBnJSolutionsBarracudaWatcher

Thanks Paul and Ken!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com
_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

48. Apr 6, 2009 9:53 PM (in response to Matt Ray)

New ZenPacks in the Community

Zenoss Community member Steven O'Donnell has generously provided his
new MAC Address Report ZenPack. This ZenPack consists of a report for
listing each MAC address and the Device and Interface it is associated
with. This report makes use of the layer 2 catalog already present in
Zenoss.

MAC Address Report: http://www.zenoss.com/community/projects/zenpacks/mac-report
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackssodonnellMACReport

Thanks Steven!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

49. Apr 6, 2009 10:22 PM (in response to Matt Ray)

New ZenPacks in the Community

Thanks to Steven O'Donnell for providing his new Event Transforms
Report ZenPack. This ZenPack consists of a report that shows all of
the Event classes that have an event transform specified within your
Zenoss installation. The larger the number of event transforms, the
harder it is to keep track of them all, so this is found to be a
valuable report. This report is sortable by the event class name,
EventClassKey, transform, and number of events in that class. It is
very similar to the All EventMappings report.

Event Transforms Report ZenPack: http://www.zenoss.com/community/projects/zenpacks/transform-report
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackssodonnelltTransformReport

Thanks Steven!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

50. Apr 7, 2009 12:31 AM (in response to Matt Ray)

New ZenPacks in the Community

Thanks to Zenoss Community member Steven O'Donnell for the new VMware
Virtual Machines Report ZenPack. This report depends on the Community
Virtual Machines ZenPack and lists all of the virtual machine devices
within the environment. This report is sortable by VM name, VMID,
guest OS, VM state, guest state and ESX host. Just like the Virtual
Machines tab, it will display a link to the VM host, if it exists in
Zenoss by the same name.

VMware Virtual Machines Report: http://www.zenoss.com/community/projects/zenpacks/virtualmachines-report
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackssodonnelltVMReport

Thanks Steven!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com
_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

51. Apr 8, 2009 1:01 PM (in response to Matt Ray)

New ZenPacks in the Community

Thanks to Community member Jürg Gerber for providing the new Tru64
Unix ZenPack. The ZenPack adds a new device class /Server/Tru64 and
has the basic definitions for the monitoring of a Tru64 Unix server
(cpu, memory, etc.).

Tru64 Unix: http://www.zenoss.com/community/projects/zenpacks/tru64
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityTru64

Thanks Jürg!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

52. Apr 11, 2009 12:16 AM (in response to Matt Ray)

New ZenPacks in the Community

Zenoss Community member Egor Puzanov has generously provided a new HP
ProLiant Monitoring ZenPack, providing very thorough coverage. This
includes support for the hardware components:
* CPUs
* Fans
* Temprature sensors
* Power supplies (limited support)
* Memory Modules
* Disk array hard disks
Logical disks and controllers (cpqida.mib)
* Fibre Channel hard disks
* Logical disks
* HBAs
* Chassis and controllers (cpqfca.mib)
* SCSI and SAS hard disks
Logical disks and controllers (cpqscsi.mib)
* IDE hard disks
Logical disks and controllers (cpqide.mib)
* NICs (cpqnic.mib)
* iLO Boards (cpqsm2.mib)
* Other PCI Devices

Other supported monitoring functions:
* Modeling
* SNMP performance (hard disks & nics)
* SNMP traps (set the current component status)

HP ProLiant Monitoring ZenPack: http://www.zenoss.com/community/projects/zenpacks/hpmon
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityHPMon

Thanks Egor!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

linuxdynasty

156 posts since
Apr 10, 2007

Currently Being Moderated

53. Apr 13, 2009 7:59 AM (in response to Matt Ray)

New ZenPacks in the Community

Matt Ray wrote:

Zenoss Community member Egor Puzanov has generously provided a new HP
ProLiant Monitoring ZenPack, providing very thorough coverage. This
includes support for the hardware components:
* CPUs
* Fans
* Temprature sensors
* Power supplies (limited support)
* Memory Modules
* Disk array hard disks
Logical disks and controllers (cpqida.mib)
* Fibre Channel hard disks
* Logical disks
* HBAs
* Chassis and controllers (cpqfca.mib)
* SCSI and SAS hard disks
Logical disks and controllers (cpqscsi.mib)
* IDE hard disks
Logical disks and controllers (cpqide.mib)
* NICs (cpqnic.mib)
* iLO Boards (cpqsm2.mib)
* Other PCI Devices

Other supported monitoring functions:
* Modeling
* SNMP performance (hard disks & nics)
* SNMP traps (set the current component status)

HP ProLiant Monitoring ZenPack: http://www.zenoss.com/community/projects/zenpacks/hpmon
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityHPMon

Thanks Egor!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

This is probably one of the best zenpacks that I have seen. Great Job Egor.

Allen Sanabria
http://linuxdynasty.org
_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

54. Apr 17, 2009 11:21 PM (in response to linuxdynasty)

New ZenPacks in the Community

Zenoss Community member Mike Albon has updated the HPUX ZenPack. This
fixes a modeler issue discussed in this thread: http://forums.zenoss.com/viewtopic.php?p=33457

HPUX ZenPack: http://www.zenoss.com/community/projects/zenpacks/hpux
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityHPUXMonitor

Thanks Mike!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

55. Apr 19, 2009 5:27 PM (in response to Matt Ray)

New ZenPacks in the Community

Thanks to Eric J. Edgar for providing his new Point Threshold ZenPack.
This ZenPack adds a new threshold type for determining when to trigger
an event. It takes a single discrete value for non min/max-type
thresholds.

It was written because the author was trying to monitor a printer-
queue status, which returned '3' for ready, '4' for off and '5' for
printing. A min/max threshold would have given false alerts when
printing. This point threshold solves that use-case.

Point Threshold: http://www.zenoss.com/community/projects/zenpacks/pointthreshold
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityPointThreshold

Thanks Eric!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

56. Apr 22, 2009 10:08 PM (in response to Matt Ray)

New ZenPacks in the Community

Zenoss Community member Tonino Greco has generously provided a new
Printer Toner ZenPack. This Zenpack consists of a modeler which will
model printers using SNMP, and determine their toner cartridge levels.
The modeler then passes these values back to Zenoss. A new tab is
added to the Device details for printers - called Printer Toner. Under
this new tab, the details per cartridge may be obtained. Perf data is
calculated as a percentage and alerts can be set of these values.

Printer Toner ZenPack: http://www.zenoss.com/community/projects/zenpacks/printertoner
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityPrinterToner

Thanks Tonino!

Thanks,Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

57. Apr 27, 2009 1:50 AM (in response to Matt Ray)

New ZenPacks in the Community

Community member Florian Deckert has provided the new Event Views
Portlet ZenPack. This ZenPack provides a Dashboard portlet that shows
a listing and status for the Event Views a user has defined.

Event Views Portlet: http://www.zenoss.com/community/projects/zenpacks/eventviews
Community ZenPack Repository: trac-zenpacks/wiki/ZenPacksfdeckertmyeventviews

Thanks Florian!

Thanks,
Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

58. Apr 30, 2009 9:51 PM (in response to Matt Ray)

New ZenPacks in the Community

Zenoss Community member Tonino Greco has updated the Printer Toner
ZenPack. This release contains changes made to the reporting of the
current level in printer toner. Now it is updated from the RRDValues
rather than from the modeller. This means changes to the toner levels
are reported accurately.

Printer Toner ZenPack: http://www.zenoss.com/community/projects/zenpacks/printertoner
Community ZenPack Repository: trac-zenpacks/wiki/ZenPackscommunityPrinterToner

Thanks Tonino!

Thanks,Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Matt Ray

2,484 posts since
Apr 5, 2008

Currently Being Moderated

59. May 5, 2009 12:43 AM (in response to Matt Ray)

New ZenPacks in the Community

Big thanks to Zenoss Community member Egor Puzanov for updating the HP
ProLiant ZenPack. He has updated to take advantage of his new
Advanced Device Details ZenPack to add substantially more information
to the hardware pages. It adds things like:
- dynamic deviceHardwareDetail tab (additional sections can be added
or removed by any ZenPack)
- dynamic deviceOsDetail tab
- dynamic deviceSoftwareDetail tab
- Number of CPU Cores
- Memory Modules section
- Logical Drives sections
- Power Supplies
- Fans
- Temperature Sensors

HP ProLiant: http://www.zenoss.com/community/projects/zenpacks/hpmon
Advanced Device Details: http://www.zenoss.com/community/projects/zenpacks/advanceddetails
trac-zenpacks/wiki/ZenPackscommunityHPMon

Thanks Egor!

Thanks,Matt Ray
Zenoss Community Manager
community.zenoss.com
mray@zenoss.com

_______________________________________________
zenoss-users mailing list
zenoss-users@zenoss.org
http://lists.zenoss.org/mailman/listinfo/zenoss-users

Report Abuse
Like (0)

Actions

More Like This

Incoming Links