Hi, I'm getting a bunch of bad OID errors for sub-interfaces on zenoss 3.1.0. Here's what I'm done so far, but without any luck.

1. copied the ethernetCsmacd template (override template / copy) to propVirtual and l2vlan as well as copied to "Layer 2 Virtual LAN using 802.1Q" and "Encapsulation Interface" without quotes.

2. deleted errors in and errors out data sources since it was those OIDs that were causing the errors

3. re-modeled router, no luck, still got errors

4. I tried changing the name in InterfaceMap.py for '135' and '131' to l2vlan and propVirtual since I read on some thread that the "longer name" could be causing a problem.

5. deleted router, re-added it as well as tried to re-model device again, still receive errors

here is the ifDescr and ifType values of the router in question:

IF-MIB::ifDescr.1 = STRING: GigabitEthernet0/0

IF-MIB::ifDescr.2 = STRING: GigabitEthernet0/1

IF-MIB::ifDescr.3 = STRING: GigabitEthernet0/2

IF-MIB::ifDescr.4 = STRING: Backplane-GigabitEthernet0/3

IF-MIB::ifDescr.5 = STRING: FastEthernet0/1/0

IF-MIB::ifDescr.6 = STRING: FastEthernet0/1/1

IF-MIB::ifDescr.7 = STRING: FastEthernet0/1/2

IF-MIB::ifDescr.8 = STRING: FastEthernet0/1/3

IF-MIB::ifDescr.9 = STRING: FastEthernet0/1/4

IF-MIB::ifDescr.10 = STRING: FastEthernet0/1/5

IF-MIB::ifDescr.11 = STRING: FastEthernet0/1/6

IF-MIB::ifDescr.12 = STRING: FastEthernet0/1/7

IF-MIB::ifDescr.13 = STRING: FastEthernet0/1/8

IF-MIB::ifDescr.14 = STRING: Null0

IF-MIB::ifDescr.15 = STRING: Vlan1

IF-MIB::ifDescr.16 = STRING: Loopback0

IF-MIB::ifDescr.17 = STRING: Vlan2

IF-MIB::ifDescr.18 = STRING: GigabitEthernet0/0.37 <- causing bad OID errors

IF-MIB::ifDescr.19 = STRING: GigabitEthernet0/0.27 <- causing bad OID errors

IF-MIB::ifDescr.20 = STRING: GigabitEthernet0/0.79 <- causing bad OID errors

IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.4 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.5 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.6 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.7 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.8 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.9 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.10 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.11 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.12 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.13 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifType.14 = INTEGER: other(1)

IF-MIB::ifType.15 = INTEGER: propVirtual(53)

IF-MIB::ifType.16 = INTEGER: softwareLoopback(24)

IF-MIB::ifType.17 = INTEGER: propVirtual(53)

IF-MIB::ifType.18 = INTEGER: l2vlan(135)

IF-MIB::ifType.19 = INTEGER: l2vlan(135)

IF-MIB::ifType.20 = INTEGER: l2vlan(135)

grep 135 ./zenoss/Products/DataCollector/plugins/zenoss/snmp/InterfaceMap.py

    '135': 'l2vlan',

grep 53 ./zenoss/Products/DataCollector/plugins/zenoss/snmp/InterfaceMap.py

     '53': 'propVirtual',

I read that it is supposed to pick up the ifType and automatically apply the appropriate template if the names match but that doesn't appear to be working for me.

Just wondering if anyone has any ideas or if I missed something?

thanks

Richard