Yes were talking over IRC to find out why the zenpack isnt working.

The installation of the zenpack has no influences of the stability of the other Zenoss-Stuff.. I can remove or install it. There are only the error messages from the install. All other Zenoss-Related Stuff is working.

Is there a requirement for the normal Global Device Search ZenPack?

For everyone i post here my transforms which i pasted under Events -> event classes -> gear (bottom left) -> Transform:

<code>

import re

# code for showing the 95th percentile in graphs

fs_id = device.prepId(evt.component)

for f in device.os.interfaces():

   if f.id != fs_id: continue

   # Extract the percent and utilization from the summary

   m = re.search("threshold of [^:]+: current value ([\d\.]+)", evt.message)

   if not m: continue

   currentusage = (float(m.groups()[0])) * 8

   p = (currentusage / f.speed) * 100

   evtKey = evt.eventKey

   # Whether Input or Output Traffic

   if evtKey == "ifInOctets_ifInOctets|high utilization":

       evtNewKey = "Input"

   elif evtKey == "ifOutOctets_ifOutOctets|high utilization":

       evtNewKey = "Output"

# code to show correct units in events

   # Check the speed to determine the appropriate conversion

   # Gbps utilization

   if currentusage > 1000000000:

       Usage = currentusage / 1000000000

       evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f Gbps) or %3.2f%% is being used." %  (Usage, p)

   # Mbps utilization

   elif currentusage > 1000000:

       Usage = currentusage / 1000000

       evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f Mbps) or %3.2f%%  is being used." %  (Usage, p)

   # Kbps utilization

   elif currentusage > 1000:

       Usage = currentusage / 1000

       evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f Kbps) or %3.2f%%  is being used." %  (Usage, p)

   # bps  utilization

   elif currentusage < 1000:

       Usage = currentusage

       evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f bps) or %3.2f%%  is being used." %  (Usage, p)

   break

# no generating of "High-Threshold"-Warnings for Tunnel-, Dialer- or Virtual-Access-Interfaces

if evt.component.find("Tunnel") >= 0:

   evt._action = "drop"

if evt.component.find("Dialer") >= 0:

   evt._action = "drop"

if evt.component.find("Virtual-Access") >= 0:

   evt._action = "drop"

</code>

Now i will post the main error message which is responsible for the disfunction(i think):

After "zenpack --install=ZenPacks.ShaneScott.DeviceSearch-1.0.0-py2.6.egg":

2011-09-26 17:38:24,424 INFO zen.HookReportLoader: loading reports from:/var/zenoss/zenoss/ZenPacks/ZenPacks.ShaneScott.DeviceSearch-1.0.0-py2.6.egg/ZenPacks/ShaneScott/DeviceSearch/reports

2011-09-26 17:38:25,132 WARNING zen.Events: Error processing transform/mapping on Event Class /

Problem on line 2: AttributeError: 'NoneType' object has no attribute 'prepId'

fs_id = device.prepId(evt.component)

btw: how can i make code fields in my post?

Today i recognized that my transforms for oppressing the "High-Threshold-Warnings" are not working. Do you know why?

Also i got an error in the ZenPacks-Overview: It says "This pack was just installed, or is missing or broken. Please restart Zope."

Restarting Zope has no effect.

Another Error is when i want to add a new Datasource under "Monitoring Templates" i get a "Server Exception":

The Server reported the following error:

AttributeError

getDataSourceClasses

The System has encountered an error. Please reload the page.

Reloading doesnt have an effect..

This error is really bad because i cant add any new datasources for new devices!!!

PLEASE HELP!!

isn't there anyone who can help? My Problem from post 9 still exists...

@Shane Scott:  did you had time to write the lines for search in interfaces?

maybe this thread can help?: message/57014#57014

Hello Shane,

the installation of your new modified Zenpack doesn't work. Even with your new version without version check(i just re-downloaded the *.egg file from your website...)

Here is the output in my console:

zenoss@x:~$ zenpack --install=ZenPacks.ShaneScott.DeviceSearch-1.2.0-py2.6.egg
Not found: zenoss >= 3.2
2011-11-14 11:50:55,764 INFO zen.HookReportLoader: loading reports from:/usr/local/zenoss/zenoss/ZenPacks/ZenPacks.ShaneScott.DeviceSearch-1.2.0-py2.6.egg/ZenPacks/ShaneScott/DeviceSearch/reports

But i am using Zenoss  Version 3.2.1. What value is the installer checking for version check?

My current transform is exactly the one you've posted above:

import re



# test device object is not None

if device:

   # code for showing the 95th percentile in graphs

   fs_id = device.prepId(evt.component)

   for f in device.os.interfaces():

      if f.id != fs_id: continue



      # Extract the percent and utilization from the summary

      m = re.search("threshold of [^:]+: current value ([\d\.]+)", evt.message)

      if not m: continue

      currentusage = (float(m.groups()[0])) * 8

      p = (currentusage / f.speed) * 100

      evtKey = evt.eventKey



      # Whether Input or Output Traffic

      if evtKey == "ifInOctets_ifInOctets|high utilization":

          evtNewKey = "Input"

      elif evtKey == "ifOutOctets_ifOutOctets|high utilization":

          evtNewKey = "Output"





   # code to show correct units in events

      # Check the speed to determine the appropriate conversion

      # Gbps utilization

      if currentusage > 1000000000:

          Usage = currentusage / 1000000000

          evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f Gbps) or %3.2f%% is being used." %  (Usage, p)

      # Mbps utilization

      elif currentusage > 1000000:

          Usage = currentusage / 1000000

          evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f Mbps) or %3.2f%%  is being used." %  (Usage, p)

      # Kbps utilization

      elif currentusage > 1000:

          Usage = currentusage / 1000

          evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f Kbps) or %3.2f%%  is being used." %  (Usage, p)

      # bps  utilization

      elif currentusage < 1000:

          Usage = currentusage

          evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f bps) or %3.2f%%  is being used." %  (Usage, p)

      break



   # no generating of "High-Threshold"-Warnings for Tunnel-, Dialer- or Virtual-Access-Interfaces



   if evt.component.find("Tunnel") >= 0:

      evt._action = "drop"



   if evt.component.find("Dialer") >= 0:

      evt._action = "drop"



   if evt.component.find("Virtual-Access") >= 0:

      evt._action = "drop"

These transforms generate a warning in my event list:

Error processing transform/mapping on Event Class /

"Problem with line 72: evt.summary = "High " + evtNewKey + " Utilization: Currently (%3.2f Kbps) or %3.2f%% is being used." % (Usage, p)"

Also Tunnel-, Dialer and Virtual-Access interfaces are generating  "threshold of high utilization exeeded: current value xxxxx"-warnings. That means the Transform code you gave me works to install your ZenPack but does not drop the high threshold-warnings. Is there a way to get both things to work?

Greetz

Michael