Archived community.zenoss.org | full text search
Skip navigation
Up to Discussions in zenoss-zenpacks
1 2 Previous Next 12413 Views 25 Replies Latest reply: Jan 9, 2012 11:38 AM by rebelinux RSS
rebelinux Rank: Green Belt
rebelinux
108 posts since
Jun 6, 2008
Currently Being Moderated

Jan 9, 2012 11:58 AM

Nortel Zenpack

I have made an updated zenpack for nortel switches. I have tested it on Passport 8000, Baystack 450,470, BPS2000 & ERS 4500 series switches. This zenpack is in beta state, testers needed. See the attached files. Only for 3.0+ zenoss also if someone knows how to interpret the snmp portlist of the vlan port members (rcVlanTable) let me now.

 

Screenshot.resized.png

 

Instructions:

 

1. Put your Passport devices in /Devices/Network/Switch/Nortel/Passport/ < == tested with Passport 1624, Passport 8603 & Passport 8010

2. Put your Baystack 450,470, BPS2000 &  switches in /Devices/Network/Switch/Nortel/Baystack/ < == tested with 450,470 & BPS2000

 

1. Put your ERS Switches,  series in /Devices/Network/Switch/Nortel/ERS/ < == tested with ERS4526t - 4526gt & 4526gtx.

 

3. If you want to disable the events "threshold of operational status exceeded:". you have two options:

 

    first option, disable the threshold on the template ethernetcsmacd_64 named opeational status.

    second option, make shure that port not used on your passport are administratively down.

 

4. Thresholds Transforms for PassportCard (optional):

 

          Go to Events => Events Classes => Perf => Status, Next go and use the botton on the lower left of the windows an select transforms.

 

               Copy and Paste the code:

 

                             http://pastebin.com/8C2yML28

 

5. Thresholds Transforms for PassportInterfaceMap (optional): Events/Status/IpInterface

 

          Go to Events => Events Classes => Status => IpInterface, Next go and use the botton on the lower left of the windows an select transforms.

 

              Copy and Paste the code:

 

                              http://pastebin.com/QmgNRYzd

 

Downloads:

 

docs/DOC-3522

  • simeon411 Rank: White Belt
    simeon411
    10 posts since
    Jul 28, 2010
    Currently Being Moderated
    1. Oct 14, 2011 3:12 PM (in response to rebelinux)
    Re: Nortel Zenpack

    I sucessfuly installed the Zenpack via the Gui, however, I am getting a lot of alerts that I am uncertain about, along with a couple of issues.

     

    1.  I am gettin this error on a lot of ports:  threshold of operational status exceeded: current value 2.00

     

    2.  The zenpack has /Network/Switch/Nortel/Passport/, but what about non passport switches?  The description says it supports (Baystack 450,470, BPS2000 & ERS 4500 series switches), but where would those switches go?  Do I place them in the passport directory as well?

     

    3.  Not all the modeler plugins I place are showing up, is there a reason for that?  I associated all the modeler plugins to my 8600, however, only a handful showed up after modeling the device.

     

    4.  Great work so far, I eagerly look forward to the completion of this MIB.  As a nortel(Avaya) shop, this has the potential to be a game changer for me.

  • simeon411 Rank: White Belt
    simeon411
    10 posts since
    Jul 28, 2010
    Currently Being Moderated
    2. Oct 14, 2011 3:19 PM (in response to simeon411)
    Re: Nortel Zenpack

    Also getting this error when adding devices:

     

    2011-10-14 15:18:20,856 INFO zen.ZenDisc: Modeler zenoss.snmp.InterfaceMap processing data for device 10.129.254.105

    2011-10-14 15:18:20,861 ERROR zen.ZenDisc: Problem while executing plugin community.snmp.PassportInterfaceMap

    2011-10-14 15:18:20,861 ERROR zen.ZenDisc: Traceback (most recent call last):

      File "/opt/zenoss/Products/DataCollector/zenmodeler.py", line 623, in processClient

        datamaps = plugin.process(device, results, self.log)

      File "/opt/zenoss/ZenPacks/ZenPacks.community.NortelMon-1.4.1-py2.6.egg/ZenPacks/community/NortelMon/modeler/plugins/community/snmp/PassportInterfaceMap.py", line 77, in process

        results[1]['ifalias'][i_idx]['description'] = desc['description']

    KeyError: 'description'

  • rebelinux Rank: Green Belt
    rebelinux
    108 posts since
    Jun 6, 2008
    Currently Being Moderated
    3. Oct 14, 2011 5:25 PM (in response to simeon411)
    Re: Nortel Zenpack

    1.  I am gettin this error on a lot of ports:  threshold of operational status exceeded: current value 2.00

     

    put this transform in /Events/Status/IpInterface

     

    if evt.summary.startswith('threshold of operational status '):

        if evt.component.startswith('10/100BaseTX'):

            evt._action = "drop"

        elif evt.component.startswith('1000GbicSx'):

            evt._action = "drop"

        elif evt.component.startswith('1000GbicLx'):

            evt._action = "drop"

     

     

    if evt.summary.startswith('threshold of operational status '):

        devname = evt.device

        intname = evt.component

        descr = ''

        for iface in device.os.interfaces.objectItems():

                if iface[1].name() == evt.component:

                    descr = iface[1].description   

        if evt.severity > 0:   

     

            evt.summary = 'Interface %s  with Description (%s): Operationally Down' % (evt.component, descr)

     

        else:

            evt.summary = 'Interface %s  with Description (%s): Operationally Up' % (evt.component, descr)

     

    2.  The zenpack has /Network/Switch/Nortel/Passport/, but what about non passport switches?  The description says it supports (Baystack 450,470, BPS2000 & ERS 4500 series switches), but where would those switches go?  Do I place them in the passport directory as well?

     

    put the Baystack 450,470, BPS2000 & ERS 4500 devices in /Network/Switch/Nortel

     

    3.  Not all the modeler plugins I place are showing up, is there a reason for that?  I associated all the modeler plugins to my 8600, however, only a handful showed up after modeling the device.

     

    first, can you send me a screenshot of the modeler plugins of /Network/Switch/Nortel/Passport/. the modeller plugin setting are automatically mapped for this class. there is no need to do this manually just put your devices on the corresponding class.

     

    second, did you put your passport devices in the class /Network/Switch/Nortel/Passport/

  • rebelinux Rank: Green Belt
    rebelinux
    108 posts since
    Jun 6, 2008
    Currently Being Moderated
    4. Oct 14, 2011 8:25 PM (in response to simeon411)
    Re: Nortel Zenpack

    I have reproduced your error. Did you put any type of nortel 450,470, BPS2000, ERS4500 on the passport class? if so put this type of devices in /Network/Switch/Nortel/.

     

    Use this class /Network/Switch/Nortel/Passport/ only for Passport devices. Dont get mad is my fualt i dont give the correct instructions.

  • Kilmomo Rank: White Belt
    Kilmomo
    12 posts since
    Nov 16, 2010
    Currently Being Moderated
    5. Oct 15, 2011 3:08 PM (in response to rebelinux)
    Re: Nortel Zenpack

    Hi Rebelinux,

     

    Nice Job ,your zenpack Works wellfor me  except with  the plug-in passportCardTable Map :

     

    ERROR zen.ZenModeler: Problem while executing plugin community.snmp.PassportCardTableMap                 

    2011-10-15 21:03:48,540 ERROR zen.ZenModeler: Traceback (most recent call last): 

    File "/usr/local/zenoss/zenoss/Products/DataCollector/zenmodeler.py", line 623, in processClient 

    datamaps = plugin.process(device, results, self.log) 

    File "/usr/local/zenoss/zenoss/ZenPacks/ZenPacks.community.NortelMon-1.4.1-py2.6.egg/ZenPacks/community/NortelMon/modeler/plugins/community/snmp/PassportCardTableMap.py", line 75, in process 

    om.opstatus = self.status[om.opstatus] 

    KeyError: 5 

     

    Kilmomo

  • rebelinux Rank: Green Belt
    rebelinux
    108 posts since
    Jun 6, 2008
    Currently Being Moderated
    6. Oct 15, 2011 3:14 PM (in response to Kilmomo)
    Re: Nortel Zenpack

    yep you hit a bug. fixit shortly

  • Kilmomo Rank: White Belt
    Kilmomo
    12 posts since
    Nov 16, 2010
    Currently Being Moderated
    7. Oct 15, 2011 3:13 PM (in response to rebelinux)
    Re: Nortel Zenpack

    Hi

     

    ERS-8610

     

    Kilmomo

  • rebelinux Rank: Green Belt
    rebelinux
    108 posts since
    Jun 6, 2008
    Currently Being Moderated
    8. Oct 15, 2011 3:15 PM (in response to Kilmomo)
    Re: Nortel Zenpack

    yep you hit a bug. fixit shortly

  • rebelinux Rank: Green Belt
    rebelinux
    108 posts since
    Jun 6, 2008
    Currently Being Moderated
    9. Oct 15, 2011 3:39 PM (in response to Kilmomo)
    Re: Nortel Zenpack

    can you test the update version found on the first post. Now is version 1.4.2. Feel free to let me know is this version resolve your situations.

     

    Other quiestions did you have any other nortel hardware version?

  • Kilmomo Rank: White Belt
    Kilmomo
    12 posts since
    Nov 16, 2010
    Currently Being Moderated
    10. Oct 15, 2011 3:46 PM (in response to rebelinux)
    Re: Nortel Zenpack

    Success!!!

     

    Component Card tables is create .

    Thanks

     

    Kilmomo

  • Kilmomo Rank: White Belt
    Kilmomo
    12 posts since
    Nov 16, 2010
    Currently Being Moderated
    11. Oct 15, 2011 4:03 PM (in response to Kilmomo)
    Re: Nortel Zenpack

    Another pb ;-)

     

      I have a Warning incident for CPU in Dormant mode and I can t remove monitoring for this CPU device in Cards table component   :

     

     

    threshold of PassportCardTable status exceeded: current value 5.00

     

     

    Kilmomo

  • rebelinux Rank: Green Belt
    rebelinux
    108 posts since
    Jun 6, 2008
    Currently Being Moderated
    12. Oct 15, 2011 4:05 PM (in response to Kilmomo)
    Re: Nortel Zenpack

    working on it!!!

  • simeon411 Rank: White Belt
    simeon411
    10 posts since
    Jul 28, 2010
    Currently Being Moderated
    13. Oct 15, 2011 4:50 PM (in response to rebelinux)
    Re: Nortel Zenpack

    "put this transform in /Events/Status/IpInterface"

     

    How do I go about doing that?  Forgive my ignorance.

  • simeon411 Rank: White Belt
    simeon411
    10 posts since
    Jul 28, 2010
    Currently Being Moderated
    14. Oct 15, 2011 5:00 PM (in response to rebelinux)
    Re: Nortel Zenpack

    Under Vlan Tables, Port memebers looks something like this:

     

    000000000000000000000000000000000000000000c0

     

    or

     

    000000000000000000000000000000008fffffffff0f00000000000000000000000000000000

     

    This is on a 8600.

1 2 Previous Next

More Like This

  • Retrieving data ...

Incoming Links

Legend

  • Correct Answers - 4 points
  • Helpful Answers - 2 points