Archived community.zenoss.org | full text search
Skip navigation
4129 Views 9 Replies Latest reply: Feb 27, 2013 2:59 PM by kenhen93 RSS
Doru Davidson Newbie 2 posts since
Nov 16, 2011
Currently Being Moderated

Aug 13, 2012 11:56 AM

Remote Collector graphs not working

Hello there,

 

I am a Zenoss newbie. I recently installed a zenoss 3.2.1 stack and attempted to turn it into a remote collector for another 3.2.1 core. However, the graphs through the remote collector do not seem to show up.

 

I tried different ways to change the Render URL:

None of it helped, though.

 

Does anyone have a tested step-by-step method of debugging this issue?

 

Also, I understand that 4.2 fixed a fair amount of issues when it comes to remote collectors. Did anyone upgrade to 4.2 from 3.2.1 and had those issues solved?

 

 

Thanks for your time,

Doru Davidson

  • nilie Rank: Green Belt 372 posts since
    May 27, 2010
    Currently Being Moderated
    1. Oct 30, 2012 3:35 PM (in response to Doru Davidson)
    Re: Remote Collector graphs not working

    Same thing for me on a clean Zenoss Core v4.2 install. I tried all the suggestions other people made on this forum (by the way they were all about v3 or earlier) but with no success. The RRD files are being updated on the remote collector but instead of each graph all I have is the placeholder for the image and no error message in the logs.

  • dpetzel Rank: Brown Belt 1,141 posts since
    Oct 17, 2010
    Currently Being Moderated
    2. Oct 30, 2012 4:23 PM (in response to nilie)
    Re: Remote Collector graphs not working

    I've run into this quite a bit (albeit always on 3x). It generally comes down to the render URL of the collector. I'm guessing yours looks something like http://collectorname:8090? If so can you confirm your able to telnet into 8090 on the collector from your workstation (NOT your zenoss master)?

  • sahul hameed Newbie 4 posts since
    Oct 30, 2012
    Currently Being Moderated
    3. Oct 30, 2012 11:40 PM (in response to Doru Davidson)
    Re: Remote Collector graphs not working

    I too have a problem in my remote collector (i am using zenoss 4.2 on centos 5). i have installed the distributed collector zenpack but then i dont get any graph for the devices monitored by my remote collector.I had referred docs/DOC-2496 . Can anyone explain in brief about installing distributed collector in zenoss 4.2. please help me out

  • nilie Rank: Green Belt 372 posts since
    May 27, 2010
    Currently Being Moderated
    4. Oct 31, 2012 12:23 PM (in response to dpetzel)
    Re: Remote Collector graphs not working

    Dpetzel,

     

    No I'm not able to telnet into the collector on the port you indicated and on a closeer inspection I could see the port 8090 in not open on the collector.

     

    Thanks.

  • nilie Rank: Green Belt 372 posts since
    May 27, 2010
    Currently Being Moderated
    5. Nov 1, 2012 2:52 PM (in response to dpetzel)
    Re: Remote Collector graphs not working

    Dpetzel,

     

    Actually you pointed me to the right direction. Reading the document about how to manually add a collector and doing some troubleshooting allowed me to solve the problem. It seems that installing the distributed collector zenpack does not start the zenrender service on any of the servers. All I had to do is to start zenrender on the hub and on the collector and the graphs came out just fine.

     

    Too bad I can't give you helpful answer points because you really deserve them.

  • dpetzel Rank: Brown Belt 1,141 posts since
    Oct 17, 2010
    Currently Being Moderated
    6. Nov 1, 2012 3:19 PM (in response to nilie)
    Re: Remote Collector graphs not working

    hmm interesting. zenrender use to be started on 3.x... I don't know about 4.x quite yet, but I wonder if we shouldnt bring this thread to BigEgor's attention so the pack can handle this situation.

  • nilie Rank: Green Belt 372 posts since
    May 27, 2010
    Currently Being Moderated
    7. Nov 1, 2012 3:50 PM (in response to dpetzel)
    Re: Remote Collector graphs not working

    I also noticed that after installing the distributed collector zenpack, the zenrender.conf configuration file was not modified with the new values for monitor and hubhost so I had to do it manually.

  • kenhen93 Rank: White Belt 100 posts since
    Sep 27, 2011
    Currently Being Moderated
    8. Feb 26, 2013 1:26 PM (in response to nilie)
    Re: Remote Collector graphs not working

    I am also having the same problem here. I am running 4.2.3. I used the distributed collector zenpack to configure my collector.

     

    I have verified zenrender if running on both the master and collector. I can telnet both ways (from the collector to master and backward) over port 8090 and 8091. I have tried all the address listed above in the first post.

     

    If i actually try an other render URL besides http://<zenmaster>:8091/<collector> the graps do not show up at all. With this URL i at least see the graphs but all the data points show up at NAN. If i got to that URL it says 'The image "http://<zenmaster>:8091/<collector>" cannot be diplayed because it contains errors.

     

    If i look on the collector at /opt/zenoss/perf/Daemons/<collector>/ all of the graphs are getting updated every 5 minutes. If i take a look at the RRDs  using RRDtool they are showing values

  • kenhen93 Rank: White Belt 100 posts since
    Sep 27, 2011
    Currently Being Moderated
    9. Feb 27, 2013 2:59 PM (in response to kenhen93)
    Re: Remote Collector graphs not working

    renaming the hosts.allow and hosts.deny seems to have done the trick. With these files up none of the service can talk to rrdcached

More Like This

  • Retrieving data ...

Legend

  • Correct Answers - 4 points
  • Helpful Answers - 2 points