Submitted by:John Field
Description:
This ZenPack transforms JetDirect enabled printer traps into their human readable form. There are 23 traps that can be sent according to the JetDirect documentation. There are transforms that put the actual error in the event summary, rather than the OID. Here are the traps being transformed -
10031 - Checking Printer
35037 - Page Punt (error 21)
35076 - Memory Out (error 20)
40010 - Toner Out
40019 - Output Full
40021 - Cover Open
40026 - Tray Missing
40038 - Toner Low
40050 - Generic Error <-- good info right there!
40051 - Fatal Error <-- even better!
40079 - Offline
40090 - Envelope Connection Error
40124 - Duplex Connection Error
41002 - Tray 1 Load Paper
41202 - Tray 2 Load Paper
41302 - Tray 3 Load Paper
41502 - Tray 4 Load Paper
44001 - Paper Jam - Input
44002 - Paper Jam - Output
44003 - Paper Jam - Top Cover
44004 - Paper Jam - Duplexer
Screenshots:
Installation Requirements:
- Zenoss Versions Supported: 2.5
- External Dependencies: Configure your printer to send traps to Zenoss.
- ZenPack Dependencies: none
- Installation Notes: Create the Event Class /Printer before installing. zopectl restart after installing this ZenPack.
- Configuration: none
History:
Change History:
- 1.0 initial release
Tested: This ZenPack was tested with versions XXX and YYY.
Source: http://zenpacks.zenoss.org/trac-zenpacks/browser/zenpacks/ZenPacks.community.HPPrinterTrapTransforms
Tagged Releases:
Known issues: