If you have the HP Procurve ZenPack successfully installed then presumably you have already added a device class /Devices/Network/Switch/HP as per the instructions at docs/DOC-3486 ?
If they are not already under that device class, try moving a sample switch to /Devices/Network/Switch/HP (simply drag and drop from the GUI). I think you will find that this device class has extra performance templates associated with it that are specific to ProCurve switches. If that's the case, when you have moved your device then you may see an extra entry in the lefthand menu for the device under monitoring templates.
If not, then you may need to bind the new performance template yourself (some developers provide a device class with their ZenPack and automatically bind their template, others don't - sorry I haven't used this ZenPack myself so don't know). If the template isn't bound then I would bind it to your /Devices/Network/Switch/HP device class - select the class and click the DETAILS link at the top of the lefthand menu. Then use the Action icon (gear icon) at the bottom of the lefthand menu to "Bind Templates". Pick the ProCurve template off the dropdown list. If you bind the template to the CLASS then every device in the class can automatically inherit that configuration. Make sure you don't accidentally delete any templates that are already bound.
Once you have this, the Graphs lefthand menu for a device should show you the new data. Note that most templates sample data every 5 minutes and it would be typical to wait 2 cycles before you start seeing values.
Cheers,
Jane
