Archived community.zenoss.org | full text search
Skip navigation
Up to Discussions in zenoss-users
22212 Views 14 Replies Latest reply: Mar 22, 2010 3:15 PM by ewall RSS
ketteringce Rank: White Belt
ketteringce
14 posts since
Mar 19, 2010
Currently Being Moderated

Mar 19, 2010 9:34 AM

SNMP Walk for APC Device Not Working

Hello All,

 

I'm currently evaluating different monitoring software for my company in hopes of finding a tool that integrates successfully with our IT infrastructure. I really do like Zenoss and currently I'm evaluating the Enterprise version (2.5.2). We are currently looking into monitoring power strips as well, and I seen that there are supported ZenPacks that can do this. We have an APC 7811 PDU, and were trying to grab SNMP information from it. I set it up with an IP and SNMPv1 access with the default community string still in tact. BUT, when I try to do an SNMP walk on the device with Zenoss, I am unable to. I know SNMP is enabled because I can grab SNMP information from our GFI LAN Network Scanner without any issues. But with Zenoss, I cannot grab any SNMP information. I know the PDU is configured correctly (as mentioned I did get results with GFI) with SNMPv1 and default community string... But I get nothing with Zenoss. It's only this device that I can't perform the SNMP walk. Any ideas? I am pretty new to this product. Thank you.

  • jmp242 ZenossMaster
    jmp242
    4,060 posts since
    Mar 7, 2007
    Currently Being Moderated
    1. Mar 19, 2010 10:03 AM (in response to ketteringce)
    Re: SNMP Walk for APC Device Not Working

    How are you doing an SNMPWalk from Zenoss? What specifically are you

    doing? Is this in the GUI or command line?

    --

    James Pulver

    Information Technology Area Supervisor

    LEPP Computer Group

    Cornell University

     

     

     

    ketteringce wrote, On 3/19/2010 9:34 AM:

    Hello All,

     

    I'm currently evaluating different monitoring software for my company in hopes of finding a tool that integrates successfully with our IT infrastructure. I really do like Zenoss and currently I'm evaluating the Enterprise version (2.5.2). We are currently looking into monitoring power strips as well, and I seen that there are supported ZenPacks that can do this. We have an APC 7811 PDU, and were trying to grab SNMP information from it. I set it up with an IP and SNMPv1 access with the default community string still in tact. BUT, when I try to do an SNMP walk on the device with Zenoss, I am unable to. I know SNMP is enabled because I can grab SNMP information from our GFI LAN Network Scanner without any issues. But with Zenoss, I cannot grab any SNMP information. I know the PDU is configured correctly (as mentioned I did get results with GFI) with SNMPv1 and default community string... But I get nothing with Zenoss. It's only this device that I can't perform the SNMP walk.

    Any ideas? I am pretty new to this product. Thank you.

    >

  • ketteringce Rank: White Belt
    ketteringce
    14 posts since
    Mar 19, 2010
    Currently Being Moderated
    2. Mar 19, 2010 10:19 AM (in response to jmp242)
    Re: SNMP Walk for APC Device Not Working

    I've tried both actually.... Here's my syntax that I've tried in the command line:

     

    snmpwalk -v1 -cpublic IP_ADDRESS

     

    snmpwalk -v1 -cpublic IP_ADDRESS system

     

    snmpwalk -v1 -cpublic IP_ADDRESS 1.3

     

    Those are the three cases that I've tried (IP_ADDRESS is the a IP of the APC). All with no response. Same goes for GUI. 

  • jmp242 ZenossMaster
    jmp242
    4,060 posts since
    Mar 7, 2007
    Currently Being Moderated
    3. Mar 19, 2010 10:28 AM (in response to ketteringce)
    Re: SNMP Walk for APC Device Not Working

    Are you sure the security on the device allows SNMP connections from the

    Zenoss box IP address?

    --

    James Pulver

    Information Technology Area Supervisor

    LEPP Computer Group

    Cornell University

     

     

     

    ketteringce wrote, On 3/19/2010 10:19 AM:

    I've tried both actually.... Here's my syntax that I've tried in the command line:

     

    snmpwalk -v1 -cpublic IP_ADDRESS

     

    snmpwalk -v1 -cpublic IP_ADDRESS system

     

    snmpwalk -v1 -cpublic IP_ADDRESS 1.3

     

    Those are the three cases that I've tried (IP_ADDRESS is the a IP of the APC). All with no response. Same goes for GUI. 

    >

  • ketteringce Rank: White Belt
    ketteringce
    14 posts since
    Mar 19, 2010
    Currently Being Moderated
    4. Mar 19, 2010 11:07 AM (in response to jmp242)
    Re: SNMP Walk for APC Device Not Working

    I can choose to include an NMS or I can leave it as 0.0.0.0. I left it open to all, and I've also tried limiting it to just the Zenoss servers IP address. Same results either way.

  • jmp242 ZenossMaster
    jmp242
    4,060 posts since
    Mar 7, 2007
    Currently Being Moderated
    5. Mar 19, 2010 11:39 AM (in response to ketteringce)
    Re: SNMP Walk for APC Device Not Working

    Hmmm... Any firewall in the way perhaps?

    --

    James Pulver

    Information Technology Area Supervisor

    LEPP Computer Group

    Cornell University

     

     

     

    ketteringce wrote, On 3/19/2010 11:07 AM:

    I can choose to include an NMS or I can leave it as 0.0.0.0. I left it open to all, and I've also tried limiting it to just the Zenoss servers IP address. Same results either way.

    >

  • ketteringce Rank: White Belt
    ketteringce
    14 posts since
    Mar 19, 2010
    Currently Being Moderated
    6. Mar 19, 2010 1:23 PM (in response to jmp242)
    Re: SNMP Walk for APC Device Not Working

    Thats a really good question. I didn't really think of it because I thought most of our servers that I was currently monitoring resided on the same segment. Doing some research I can't really test any of our other systems because they don't reside on that segment. I'm thinking the reason it worked for GFI is because I SNMP scanned on the same segment. SO, I'll try and get that info from our firewall guy and give you an update afterwards. Thanks.

  • ketteringce Rank: White Belt
    ketteringce
    14 posts since
    Mar 19, 2010
    Currently Being Moderated
    7. Mar 22, 2010 9:11 AM (in response to ketteringce)
    Re: SNMP Walk for APC Device Not Working

    So, checked with our firewall guy and he stated that there isn't any firewall on our internal network. I'm allowing the appropriate ports open on the Zenoss box as well. I even tried with the firewall disabled on the Zenoss box, and it did not work. You can look at the attached pic for settings when the firewall is turned on.

    Attachments:
  • jmp242 ZenossMaster
    jmp242
    4,060 posts since
    Mar 7, 2007
    Currently Being Moderated
    8. Mar 22, 2010 9:14 AM (in response to ketteringce)
    Re: SNMP Walk for APC Device Not Working

    What OS is Zenoss installed on?

    --

    James Pulver

    Information Technology Area Supervisor

    LEPP Computer Group

    Cornell University

     

     

     

    ketteringce wrote, On 3/22/2010 9:12 AM:

    So, checked with our firewall guy and he stated that there isn't any firewall on our internal network. I'm allowing the appropriate ports open on the Zenoss box as well. I even tried with the firewall disabled on the Zenoss box, and it did not work. You can look at the attached pic for settings when the firewall is turned on.

    >

  • ketteringce Rank: White Belt
    ketteringce
    14 posts since
    Mar 19, 2010
    Currently Being Moderated
    9. Mar 22, 2010 9:23 AM (in response to jmp242)
    Re: SNMP Walk for APC Device Not Working

    CentOS release 5.4

  • jmp242 ZenossMaster
    jmp242
    4,060 posts since
    Mar 7, 2007
    Currently Being Moderated
    10. Mar 22, 2010 9:27 AM (in response to ketteringce)
    Re: SNMP Walk for APC Device Not Working

    Weird... Can you ping the APC device? Telnet to port 161? When you issue

     

    snmpwalk -v1 -cpublic IP_ADDRESS

     

    what do you get back? A timeout?

    --

    James Pulver

    Information Technology Area Supervisor

    LEPP Computer Group

    Cornell University

     

     

     

    ketteringce wrote, On 3/22/2010 9:23 AM:

    CentOS release 5.4

    >

  • ketteringce Rank: White Belt
    ketteringce
    14 posts since
    Mar 19, 2010
    Currently Being Moderated
    11. Mar 22, 2010 9:54 AM (in response to jmp242)
    Re: SNMP Walk for APC Device Not Working

    Ha... Well, good news. The issue has been resolved. The network guy got back to me and said that we use a different default gateway then the usual. So, after I changed that, I could start the SNMP walk. Odd thing though is that I could still communicate with it via ping, and I could grab SNMP info from GFI. I could also access APC's web interface to look at load metrics. So, sorry about all the trouble. I wish I would of known of this oddball gateway. Thanks for taking the time to help me out. One last question, to start monitoring this APC AP7811 device, is there any ZenPacks that would support his? Thanks again.

  • jmp242 ZenossMaster
    jmp242
    4,060 posts since
    Mar 7, 2007
    Currently Being Moderated
    12. Mar 22, 2010 10:56 AM (in response to ketteringce)
    Re: SNMP Walk for APC Device Not Working

    I'm not aware of any Zenpacks, but you should look at the Zenpack page

    and consider creating your own Templates (and maybe Zenpacks). The

    Templates aren't very difficult, the Zenpacks are a bit more so.

    --

    James Pulver

    Information Technology Area Supervisor

    LEPP Computer Group

    Cornell University

     

     

     

    ketteringce wrote, On 3/22/2010 9:55 AM:

    Ha... Well, good news. The issue has been resolved. The network guy got back to me and said that we use a different default gateway then the usual. So, after I changed that, I could start the SNMP walk. Odd thing though is that I could still communicate with it via ping, and I could grab SNMP info from GFI. I could also access APC's web interface to look at load metrics. So, sorry about all the trouble. I wish I would of known of this oddball gateway. Thanks for taking the time to help me out. One last question, to start monitoring this APC AP7811 device, is there any ZenPacks that would support his? Thanks again.

    >

  • ketteringce Rank: White Belt
    ketteringce
    14 posts since
    Mar 19, 2010
    Currently Being Moderated
    13. Mar 22, 2010 2:30 PM (in response to jmp242)
    Re: SNMP Walk for APC Device Not Working

    Will do, thank you.

  • ewall Rank: Green Belt
    ewall
    145 posts since
    Nov 5, 2008
    Currently Being Moderated
    14. Mar 22, 2010 3:15 PM (in response to ketteringce)
    Re: SNMP Walk for APC Device Not Working

    Just a small word of warning, ketteringce: compiling your own MIBs in Zenoss is, um, still not for the feint of heart. You'll probably need to set aside more time that you expected for it.

     

    There are a few ZenPacks to support specific modules (7841, 7930, 9225)--so you might be lucky if you have one of those.

     

    Maybe somelike (like me, I suppose) should make a ZenPack that installs the latest APCC MIBs for all of their products (like the ZenPacks for the Cisco & HP ProLiant MIBs). One of these days...

More Like This

  • Retrieving data ...

Legend

  • Correct Answers - 4 points
  • Helpful Answers - 2 points